А никто не находил в продаже крепление на кокпит? Себе тоже установил VC, но крепление сделали только снизу, в результате всё разболталось и сломалась защёлка на приборке(( Теперь при езде скрипит. Находил только китайскую планку для ретрофита, но она не подходит под стандартную рамку. Нашел интересное решение в германии, но они не отправляют((
Hello all together, since I retrofitted the mib2 unit and the vc into my prefacelift a3 my traffic sign recognition doesn't work anymore. I tried updating the camera to index g and uploading the newest parameters but it still does not work. So can anyone tell me if he get the traffic sign recognition working without changing the camera to the newer facelift version? My vc was a factory new one so I don't know if maybe some parameters are missing on the vc. Greetings
I know that those cameras are different. But for example in the Seat Leon you can get the traffic sign recognition work with the old camera and retrofitted mib2 unit. So I hope that there is a way to get it also in the A3 working. With index g you can code in the camera the installed unit to mib2 with psd 1.5, but it did not work after that.
Народ как щас с доустановкой кокпита? Новые от 150 тр, Бу говорят ток у дилера можно прописать, а на дорест (2 дилера которым звонил) сказали ставить нельзя поставить так как по вину не подходит((
Несколько установщиков сказали что с февраля нельзя и вот еще прислали: Due to more stringent security requirements, the service process for installing used immobiliser control units (from February 2021 onwards) has been modified (see list). • In future, you will need to apply for approval from AUDI AG to install any used immobiliser control units. • The application is shown automatically when you attempt to adapt the immobiliser control unit using the ODIS tester (or a laptop with ODIS access). • Print out the application, sign it and send it to the e-mail address given in the application. • The department in charge of approvals will check that the application is correct and complete. • You will then receive an e-mail with information regarding the outcome of your application. • Please note: It may take up to 48 hours before you receive a reply. • Once approval has been granted, it is only possible to adapt the control unit to the vehicle identification number documented in the application. There is no time limit for doing this. This currently affects the following control units: Instrument cluster Audi TT (FV) 2015 > Audi A3 (8V/ FF) 2013 > Audi Q2 (GA) 2017 > Audi Q3 (F3) 2019 > Convenience system central control unit Audi A4 (8K/ FL) 2008 > 2015 Audi A5 (8T/ FR/ 8F/ FH) 2008 > 2015 Audi Q5 (8R/ FP) 2009 > 2015 Audi A6 (4G/ FC) 2011 > 2017 Audi A7 (4G/ FC) 2011 > 2017 Audi A8 (4H/ FD) 2010 > 2017 Audi R8 (FX) 2015 > This list may be extended to include other control units at any time. Technical product information 2062033/1 Page 1 of 2" Production change February 2021 Note for speaking with the customer: If a customer brings a used immobiliser control unit with their vehicle to the workshop for installation, we recommend that you alert them to this modified process. This transparency helps avoid later